Zastanawiasz się, jak zmienić prefiks bazy danych WordPress dla twojej witryny internetowej?
Zmiana prefiksu bazy danych może zabezpieczyć dane twojej witryny internetowej przed iniekcjami SQL i innymi atakami hakerów internetowych. Może to być ważny krok w kierunku poprawy zabezpieczeń WordPress.
W tym poradniku pokażemy, jak zmienić prefiks bazy danych WordPress, aby poprawić zabezpieczenia.
Dlaczego warto zmienić prefiks bazy danych WordPress?
Baza danych WordPress jest jak mózg dla całej twojej witryny internetowej WordPress, ponieważ przechowywane są w niej wszystkie informacje i pliki.
To sprawia, że baza danych jest ulubionym celem hakerów. Spamerzy i hakerzy mogą uruchamiać zautomatyzowane kody do wstrzykiwania kodu SQL i dostać się do twojej bazy danych WordPress.
Niestety, wiele osób zapomina o zmianie prefiksu bazy danych podczas instalacji WordPressa. Ułatwia to hakerom planowanie masowych ataków poprzez celowanie w domyślny prefiks wp_.
Najprostszym sposobem na zabezpieczenie twojej bazy danych WordPress jest zmiana prefiksu bazy danych, co jest naprawdę proste do zrobienia na witrynie, którą dopiero konfigurujesz.
Potrzeba kilku dodatkowych kroków, aby poprawnie zmienić prefiks bazy danych WordPress dla Twojej witryny bez całkowitego jej zepsucia. Mając to na uwadze, pokażemy ci, jak zmienić prefiks bazy danych WordPress i poprawić twoje zabezpieczenia WordPress.
Film instruktażowy
Jeśli nie podoba Ci się film lub potrzebujesz więcej instrukcji, po prostu czytaj dalej.
Jak zmienić prefiks bazy danych WordPress?
Zalecamy wykonanie kopii zapasowej bazy danych WordPress przed wykonaniem jakichkolwiek czynności sugerowanych w tym poradniku. Ważne jest również, aby codziennie tworzyć kopie zapasowe twojej witryny internetowej WordPress za pomocą wtyczki takiej jak Duplicator.
Zalecamy również przekierowanie odwiedzających twoją stronę na tymczasową stronę konserwacji podczas zmiany prefiksu bazy danych. W przeciwnym razie możesz spowodować złe wrażenia użytkowników odwiedzających twoją witrynę internetową.
Jak zmienić prefiks tabeli w wp-config.php
Po pierwsze, będziesz musiał połączyć się z twoją witryną internetową za pomocą FTP lub aplikacji File Manager na twoim koncie hostingowym WordPress.
Następnie musisz otworzyć twój plik wp-config.php, który znajduje się w katalogu głównym WordPress. Tutaj możesz zmienić linię prefiksu tabeli z wp_ na coś innego, na przykład wp_a123456_
Linia wyglądałaby więc następująco:
$table_prefix = 'wp_a123456_';
Uwaga: Prefiks tabeli można zmienić tylko przy użyciu cyfr, liter i podkreśleń.
Zmiana wszystkich nazw tabel bazy danych
Następnie musisz połączyć się z twoją bazą danych za pomocą narzędzia phpMyAdmin. Jeśli twój host korzysta z kokpitu cPanel, to z łatwością znajdziesz tam phpMyAdmin.
Istnieje w sumie 11 domyślnych tabel WordPress, więc ich ręczna zmiana byłaby uciążliwa.
Zamiast tego należy kliknąć kartę „SQL” u góry.
Następnie możesz wpisz następujące zapytanie SQL:
RENAME table `wp_commentmeta` TO `wp_a123456_commentmeta`;
RENAME table `wp_comments` TO `wp_a123456_comments`;
RENAME table `wp_links` TO `wp_a123456_links`;
RENAME table `wp_options` TO `wp_a123456_options`;
RENAME table `wp_postmeta` TO `wp_a123456_postmeta`;
RENAME table `wp_posts` TO `wp_a123456_posts`;
RENAME table `wp_terms` TO `wp_a123456_terms`;
RENAME table `wp_termmeta` TO `wp_a123456_termmeta`;
RENAME table `wp_term_relationships` TO `wp_a123456_term_relationships`;
RENAME table `wp_term_taxonomy` TO `wp_a123456_term_taxonomy`;
RENAME table `wp_usermeta` TO `wp_a123456_usermeta`;
RENAME table `wp_users` TO `wp_a123456_users`;
Pamiętaj, aby zmienić prefiks bazy danych na ten, który wybrałeś podczas edycji pliku wp-config.php.
Może być również konieczne dodanie wierszy dla innych wtyczek, które dodają własne tabele w bazie danych WordPress. Chodzi o to, aby zmienić wszystkie prefiksy tabel na te, które chcesz.
Tabela opcji
Następnie musimy przeszukać tabelę opcji
pod kątem wszelkich innych pól, które używają wp_ jako prefiksu, abyśmy mogli je zastąpić.
Aby przyspieszyć ten proces, można użyć tego zapytania:
SELECT * FROM `wp_a123456_options` WHERE `option_name` LIKE '%wp_%'
Spowoduje to zwrócenie wielu wyników, które należy przejrzeć jeden po drugim, aby zmienić te linie i ich prefiksy.
Tabela UserMeta
Następnie musimy przeszukać usermeta
pod kątem wszystkich pól, które używają wp_ jako prefiksu, abyśmy mogli go zastąpić.
W tym celu można użyć tego zapytania SQL:
SELECT * FROM `wp_a123456_usermeta` WHERE `meta_key` LIKE '%wp_%'
Liczba wpisów może się różnić w zależności od tego, ile wtyczek WordPress używasz na swojej witrynie internetowej. Po prostu zmień wszystko, co ma wp_ na nowy prefiks.
Teraz możesz przetestować swoją witrynę. Jeśli wykonałeś powyższe kroki, wszystko powinno działać poprawnie.
Zalecamy wykonanie nowej kopii zapasowej twojej bazy danych dla bezpieczeństwa.
Mamy nadzieję, że ten artykuł pomógł ci dowiedzieć się, jak zmienić prefiks bazy danych WordPress. Możesz również zapoznać się z naszym przewodnikiem na temat optymalizacji twojej bazy danych WordPress i naszymi eksperckimi typami najlepszych wtyczek do bazy danych WordPress.
Syed Balkhi
Hey WPBeginner readers,
Did you know you can win exciting prizes by commenting on WPBeginner?
Every month, our top blog commenters will win HUGE rewards, including premium WordPress plugin licenses and cash prizes.
You can get more details about the contest from here.
Start sharing your thoughts below to stand a chance to win!
Moinuddin Waheed
This is an eye opener for wordpress security.
I never felt the need to change the database prefix for its simplicity and never knew that leaving it as it is can be dangerous.
I think most of the beginners leave database prefix as it is and never change it.
I will definitely keep this in mind while installing every new wordpress website.
mohadese esmaeeli
Hello. Changing the prefix of WordPress tables is very, very important because this prefix is the default, and most people don’t change it, making it susceptible to testing by any hacker. So, it makes sense to alter it, and I recommend this to all my friends. If we change the prefix during the WordPress installation, it’s much better. However, even after installation, it is possible to change the table prefix.
Ka Khaliq
Hi there,
I’m referring to this article to update my WordPress website database prefix.
I have a confusion about updating the Options and Usermeta tables. Upon running the respective SQL queries, the results obtained, also contains some rows something like transient_wp_cloudflare OR dismissed_wp_pointers OR tlwp_feedback_data OR wpseo_social etc.
So do I need to update such rows too where wp_ is present in the middle/end OR do I just need to update rows that has the wp_ prefix at the start like wp_page_for_privacy_policy etc.
I understand that by prefix means, something at the start but still want to solve this confusion.
WPBeginner Support
No, you would want to leave those tables as they are as those are used by plugins and other tools that are looking for those specific titles.
Administrator
Eka
you save my time, thanks alot bro.
i do test password and the problem has been detect
thanks !
WPBeginner Support
Glad our guide was helpful
Administrator
Barry Richardson
A plugin developer told me that you cannot have a Wordpress blog without a database prefix. This is very confusing because I have had an active Wordpress blog for 5 years – and it has no database prefix. So, can you have a Wordpress site without a database prefix?
WPBeginner Support
WordPress has a database prefix by default without you needing to make any changes, this is a way to customize the prefix.
Administrator
Emily
Hi there, I was following another tutorial to look at the database files and noticed mine have names like „wphy_users” … is this possibly an extension of the thing described here, just without the _ before?
Look forward to your reply!
WPBeginner Support
Correct, from the sound of it your database was created with a different prefix
Administrator
Izzy
Hi, I changed my table prefix names ia while a go. I found out there where some new maps added with the old name + the main folder (database I think) also has the old name. Now I also found out my folders already HAD a different name than the standard „wp” prefix name, so the change wasn’t even needed in the first place. The only thing now is that half of the tables has 1 certain name and the other ones have another name. Because everything works fine now I don’t want to change things again, but my only question now is: is it a problem that the tables have different names? Do they all need to be named the same, or does it not matter?
WPBeginner Support
The extra tables may have been created by a plugin, we would recommend your site using the same prefix for all of your content.
Administrator
Akhilesh
I am multi domain hosting. at the time of installation of WP what have to put in table prefix (as wp_ written by default.)??
Please suggest me as early as possible…
WPBeginner Support
You would choose what you want the prefix to be if you’re changing your site’s database prefix
Administrator
Mainak Ghosh
After changing database prefix i am getting „Sorry, you are not allowed to access this page” this error when i visit WordPress admin dashboard.
WPBeginner Support
You may want to ensure you updated all of the links in your tables and you may want to check your wp-config file for another location. To see if it is more than one error you could enable wp debug: https://www.wpbeginner.com/wp-tutorials/how-to-set-up-wordpress-error-logs-in-wp-config/
Administrator
Kid Max
Hi, I’m using wordpess multisite. I want to use home site’s database prefix and folder for media attachment for all of subsite including home site. Any idea?
WPBeginner Support
You could upload your images to the home site’s media library and embed the images on your subsites to do something like that.
Administrator
Kid Max
I know about that, but featured images not support for that, so I want to use home site’s media database prefix for all site.
WPBeginner Support
Sadly, at the moment we don’t have a recommended method for that.
Mike
I tried it and then I couldn’t login. Probably because I have a security plugin.
If I disable and delete all my plugins and just leave my installation with the core WP, and then I make the change, would that probably eliminate the need to change anything in usermeta or the options tables? i.e. Would that probably be the safest way to make the table change and not break anything.
Then, I’ll just re-install my plugins.
Mishel
According to this article, Changing the WordPress table prefix does absolutely nothing to enhance the site security.
Even if we have changed the table prefix, a hacker can find the table prefix by running this code:
SELECT DISTINCT SUBSTRING(`TABLE_NAME` FROM 1 FOR ( LENGTH(`TABLE_NAME`)-8 ) )
2
FROM information_schema.TABLES WHERE
3
`TABLE_NAME` LIKE '%postmeta’;
WPBeginner Support
Hi Mishel,
We don’t agree with that. Every security step that obscures something can be uncovered by a experienced hacker. These steps just add a difficulty layer to make your overall security harder to crack. Changing table prefix certainly has no downside to it and if it can block some automated and obvious hacking attempts, then its totally worth it.
Administrator
Sayeed
Yes I agree.
Daniel
Just what I was looking for. Thanks.
Mehdi
The queries in both wp_options and wp_usermeta return datas that is contained wp should I rename them too?
ex: wpseo_title, _yoast_wpseo_
rado
I made really silly mistake, in my wp-config file i assign the variable $table-prefix without the underscore at the end. Something like „wp_12345”, it should be „wp_12345_”.
Molly
this broke my files, none of my files are accessible on the local or live sites, thankfully this is all learning and a test site, but what went wrong?
Josch
Works fine, thank you very much! Except: I get the following warning in the backend after changing prefix. Tried it two times:
Warning: Cannot modify header information – headers already sent by (output started at /myurl/wp-config.php:1) in /myurl/wp-includes/option.php on line 837
Warning: Cannot modify header information – headers already sent by (output started at /myurl/wp-config.php:1) in /myurl/wp-includes/option.php on line 838
Can you help me?
WPBeginner Support
Hi Josch,
This error can be caused by an empty space or an extra line at the end of wp-config.php file. Deleting it can solve the issue.
Administrator
Mehdi
Hi, thank you for your article. I have a question about that. If you have some plugins which are installed in your wordpress, is this method that you mentioned above the same? or maybe we need to other things to complete this step?
I appreciate if you guide me about that because I have more than 20 install plugin in my wordpress sit.
Thank you for your help
Asterix
Won’t I have issues when updating plugins etc in the future?
I tried to use iThemes Security built in advanced features for this, but got the error: An „invalid format” error prevented the request from completing as expected. The format of data returned could not be recognized. This could be due to a plugin/theme conflict or a server configuration issue.
So I am not sure if I dare to do this manually either…
Joe
Hello Team
thanks for sharing this.
All steps went well except for the last one: UserMeta Table.
MySql doesn’t let me change the prefix for it.
That’s the error message I get:
#1054 – Unknown column 'wp_new_usermeta.umeta_id’ in 'where clause’
Please, any advise?
Many thanks,
Joe
Shivam Pandey
How to change the database prefix while installing WordPress.
Vipul Parekh
There’s an option it asked to enter db prefix while installation. so you can give prefix whatever you wish to!!
Tom B.
Is it necessary to still include the”wp_” as part of the new prefix I want to create? Can I just use any alpha numeric string to reduce the chance of any type of hack?
Thanks,
Tom
WPBeginner Support
Yes, you can use alpha-numeric string.
Administrator
Chad Mowery
Nice article. I think the query on the Options and UserMeta table will throw off less savvy individuals. Not sure how but it would help if you could provide more detail on those steps.
I followed the guide and have successfully changed my DB table prefix!
blade
This does not add really any kind of security.
If I can inject SQL, I can query against information_schema.tables and get info about tables, whatever fancy prefix you put in front of names
thomas
very true. a good htaaccess will block sql injections too. on top of that, my wordpress install only gives full database access to very select users by assigning those credentials based on certain things gathered long before a db connection. everybody else gets the very very basic access.
i also stopped most hacking attempts cold by hiding the wpzlogin.php and further password protecting access to wp admin in cpanel. it takes a login just to get to the wp login page.
John
@Shivi
This is all you need to do to change table.prefix ? even when live?
shivi
Hi , Nice article ! Thought of simplifying replacing table prefix.
In Phpmyadmin once u select the database, you can see the list of tables.
1. Enable the checkbox check all
2. select Replace table prefix in the dropdown 'with selected’
3. Enter the existing prefix in from option: 'wp_’ as mentioned in the article.
4. Enter the new prefix in to option: 'wp_a123456_’ as mentioned in the article.
5. Click submit
This helps to change table prefix for all tables including that of the plugin.
You can check these articles if you need support on dehack your site
john
So…. @SHIVI
All I need to do, to change the table.prefix is go into my config.file change the prefix and then proceed to your steps 1-5 and the table.prefix will be changed everywhere (plugins etc..)
And that’s it?
Dana Nourie
Sweet! This was great.
Matt Boden
You’ll still need to manually update the prefix on the options and usermeta tables.
Fahim
Should i run Sql for every table? i mean i have 15 table. or only change two tables you described will fix the problem.
WPBeginner Support
All tables. You would want to change table prefix from all your existing WordPress tables.
Administrator
Alph
Hi guys,
Thanks for these instructions. They helped me resolve my uppercase issues.
As a beginner, some guidance as to the how to change the table names manually would have been appreciated. I would have felt more comfortable doing it that way.
Also, for a beginner like me, some instruction on how to make the changes in the Options and Usermeta tables would been helpful.
Thanks again. Could not have done it without you!
Chris A
Thanks for the instruction. I needed to remove an UPPER case letter from a prefix and this showed that exact records I needed to touch!
TIP: with phpMyAdmin you can check all records at the bottom and select 'replace table prefix’ this will bring up a standard replace box with 'from’ and 'to’ values.
It will also save a lot of typing in step one – especially if it’s a large database.
Prabhakar
You made it !
Thanks
Igor
Hi guys,
when I made these changes it don’t give me to sign in as current user but it tells me to install wordpress again…
Igor
WPBeginner Support
This usually happens when the database you connected to is empty. Please recheck your database name.
Administrator
Alan P
wp_termmeta is missing from the list of tables to rename.
WPBeginner Support
Thank you for notifying us. We have updated the article.
Administrator
Rick
My SQl DB have no table prefix so got error sometimes on wordpress Wpconfig.php without $table_prefix = ”;.
how to add table prefix,
when i try to add in config file and rename all table with same prefix
and login in to wp got error „you don’t have permission to access”
Sameer Panda
Worked as a charm, thanks for sharing.
Dave van Hoorn
Update the SQL for renaming the prefixes please. WordPress adds the 'wp_termmeta’ table now. It’s included in the SQL below.
RENAME table `wp_commentmeta` TO `wp_yoursitename_commentmeta`;
RENAME table `wp_comments` TO `wp_yoursitename_comments`;
RENAME table `wp_links` TO `wp_yoursitename_links`;
RENAME table `wp_options` TO `wp_yoursitename_options`;
RENAME table `wp_postmeta` TO `wp_yoursitename_postmeta`;
RENAME table `wp_posts` TO `wp_yoursitename_posts`;
RENAME table `wp_termmeta` TO `wp_yoursitename_termmeta`;
RENAME table `wp_terms` TO `wp_yoursitename_terms`;
RENAME table `wp_term_relationships` TO `wp_yoursitename_term_relationships`;
RENAME table `wp_term_taxonomy` TO `wp_yoursitename_term_taxonomy`;
RENAME table `wp_usermeta` TO `wp_yoursitename_usermeta`;
RENAME table `wp_users` TO `wp_yoursitename_users`;
Prabhudatta Sahoo
When I am renaming my tables in the database all the images in the gallery are going away, I do not understand the reason. Could anyone please help me fixing this issue?
Terry Thorson
This issue will occur if you do not update the serialized data strings (used for your gallery images) correctly in the database. A good way to do this is to use the plugin WP Migrate DB. There is an excellent tutorial for this on Lynda.com (although be sure to use the same prefix for your target database as your source database).
I learned this the hard way. Trying to start afresh, I discovered my backup was faulty as well. Luckily my webhost had an older backup I could use to restart my migration. WP Migrate DB did the trick.
Cameron Jones
I can’t find any fields in the _usermeta or _options tables that would require updating. Unless they are specifically referencing a table, they shouldn’t need to be updated. It’s a table prefix, not a variable prefix.
Cameron Jones
Actually, I stand corrected. There are a couple that will be part of a default WordPress install:
In prefix_options
prefix_user_roles
In prefix_usermeta
prefix_capabilities
prefix_user_level
prefix_dashboard_quick_press_last_post_id
prefix_user-settings
prefix_user-settings-time
You should be careful regarding updating any other fields. Plugins may either use the defined prefix or `wp_` as a prefix. Always make a backup and test on a dev or staging environment.
kapil
hi,
i have a query. assume that i have changed all my prefix from wp_something to some other name. these changes will be done to the existing fields in the database only. but wont the codes in my wordpress .php files remain the same??? so next time for any new user registration or some other registration, the entities will again be saved as wp_something as the main code in the .php files remains unchanged… ???
thanks….
tech
UPDATE `wp_a123456_options` SET `option_name`=REPLACE(`option_name`,’wp_’,’wp_a123456_’) WHERE `option_name` LIKE ‘%wp_%’;
UPDATE `wp_a123456_usermeta` SET `meta_key`=REPLACE(`meta_key`,’wp_’,’wp_a123456_’) WHERE `meta_key` LIKE ‘%wp_%’;
I do changes but after doing this i again run following query it shows prefix not changed
SELECT * FROM `wp_a123456_options` WHERE `option_name` LIKE '%wp_%’
Wiem
Thank you for the queries
Nathan WHite
This post and the responses to the comments leaves out a very important component. Does the table need to begin with wp_ ?
Coming upon another discussion in wordpress.org indicated that it indeed did not need to. It would have helped me if this question was answered by the moderator.
Also, dismissed_wp_pointers questions were not clearly answered. I changed mine.
Clare Wood
Hi guys,
I followed these steps, now when I try to see the back-end or front-end of my site I get this:
ERROR: $table_prefix in wp-config.php can only contain numbers, letters, and underscores.
I’m positive I only have lowercase letters and an underscore as my table prefix.
Any ideas? The site is on localhost.
Cheers.
Paul
Fantastic and logically prepared article on Wp security.
Thomas
Thanx a bunch! I tried to restore my old database, but to no avail. Then I figured out that my new database prefix was different from old. Made all that you recommended and vuala!
Divyesh
Thanks a Lot!!!
It worked like a charm
Nikhil
I am getting this error…….”You do not have sufficient permissions to access this page” after implementing above procedure…..how to solve it?????
Saz
These instructions have been followed but now role assignment for new users has disappeared…
Tom
Thanks for a great tips .
I have a question.
Do I need to change „wp_ ….” used in post_meta table as well?
johnny
or this plugin http://wordpress.org/plugins/db-prefix-change/
savagemike
For the wp_options and wp_usermeta tables, why not dump the database and use sed to replace „wp_” with the new prefix? Example:
sed -i 's/wp_/wp_1234/g’ > filename.sql
Then, simply import the modified dump. Easier and faster than changing cells one-by-one.
gcreator
Attacker can simple use '%wp_%’
I mean that is not fully secure at all…
because he knows the table names that wordpress generates he can simply use '_%users’ for wp_anything_users OR '_%posts’ for 'wp_anything_posts’ ..etc…
Jim
gcreator…
For 99% of the attacks against WP databases, the skiddies are using pre-built tools and default settings. This gets you out of their crosshairs.
if you are under focused attack then yeah, simple obfuscation will only slow them down, not completely protect you.