Beginner's Guide for WordPress / Start your WordPress Blog in minutes

How to Install and Setup WordPress Multisite Network

Do you want to set up and install WordPress multisite network? WordPress comes with a built-in capability to create multiple websites using the same WordPress installation.

A WordPress multisite network is used by blogs, schools, and businesses, who need to run separate websites but want to manage them under one dashboard.

In this article, we will show you how to properly install and setup a WordPress multisite network.

How to install and setup WordPress multisite network

Since this is a comprehensive article, we have added the table of contents for easier navigation:

WordPress Multisite Basics

  1. What is WordPress Multisite?
  2. Pros of using a WordPress multisite network
  3. Cons of using a WordPress multisite network
  4. Who needs a WordPress multisite network?

WordPress Multisite Installation and Set up

  1. Requirements for a WordPress multisite network
  2. Choosing a domain structure for your multisite network
  3. Setting up wildcard subdomains
  4. Setting up custom domain for WordPress multisite
  5. Enabling WordPress multisite network feature
  6. Setting up your WordPress multisite network

WordPress Multisite Configuration Settings

  1. Configuring network settings
  2. Opening your multisite network for registrations
  3. New site settings
  4. Upload settings for your multisite network
  5. Plugin menu settings

Setting up Default Content, Theme, and Plugins

  1. Adding new sites to your WordPress multisite network
  2. Adding themes and plugins to your multisite network
  3. Adding default Content to new sites

Troubleshooting and FAQs

  1. Troubleshooting WordPress multisite issues
  2. FAQs about WordPress multisite

What is WordPress Multisite Network?

A WordPress Multisite network allows you to run and manage multiple WordPress blogs or sites from a single WordPress installation.

It enables you to create new sites instantly and manage them using the same username and password. You can even allow other users to signup and create their own blogs on your domain.

The WordPress multisite network comes with advanced settings that you can use to customize each website / blog on your network.

Pros of Using a WordPress Multisite Network

In many situations, a WordPress multisite network can be more useful than managing multiple standalone WordPress sites. Here are some of the advantages of using a WordPress multisite network:

  1. As the network administrator, you can easily manage multiple sites from a single dashboard.
  2. Each site on the network can have its own admins. The site admins will have the capabilities to manage only their own website.
  3. You can install plugins / themes and activate them for multiple sites with one download.
  4. Multisite network also makes it easier for you to manage updates. You only need to update your WordPress, plugins, or themes on one “master” install.

Cons of Using a WordPress Multisite Network

Creating a WordPress multisite network is not always helpful in managing multiple sites. Here are some of the disadvantages that you should keep in mind before setting up a multisite network.

  1. All sites on the network share the same resources. This means that when your network is down, all other sites go down as well.
  2. It’s not easy to manage traffic and server resources for the beginner level users. In case, one of your websites gets unexpected traffic, then it will affect all other websites on the network.
  3. If one website gets hacked, then this means all sites on your network will get hacked.
  4. Some WordPress plugins may not work well on a multisite network.
  5. WordPress multisite network is not properly supported by all web hosting providers which limits your options. We will talk more about this later in the article.

Who needs a WordPress multisite network?

Just because you manage multiple WordPress websites does not mean you need to start using a multisite network.

There are third party tools to manage multiple WordPress sites from a single dashboard. Tools like InfiniteWP or iThemes Sync make it easier to maintain multiple WordPress sites under one roof without switching back and forth from one site to another.

Here are some scenarios when creating a multisite network makes sense:

  1. A magazine website with different sections managed by different teams.
  2. A business website with sub-sites for different locations and branches.
  3. Government or non-profit websites can use WordPress multisite for different departments, locations, and regions.
  4. Your own network of blogs running on multiple subdomains.
  5. Schools and colleges allowing students to create their own blogs on school servers.

Requirements for a WordPress Multisite Network

All websites on a WordPress multisite network share the same server resources. This means that the most important thing you will need is a good WordPress hosting.

If you are planning on having just a couple of websites with low traffic, then you can probably get away with shared hosting.

However, due to the nature of multisite network, you’d need VPS hosting or a dedicated server as your sites grow.

We recommend Bluehost because they offer both shared hosting and VPS/Dedicated servers, and they are also one of the official WordPress hosting partners.


If you’re looking for an alternative, then SiteGround and WP Engine provide excellent service for WordPress multisite network.

Apart from web hosting, you will need the basic knowledge of how to install WordPress and editing files using FTP.

Choosing a Domain Structure for your Multisite Network

On a WordPress multisite network, you can add new sites using either subdomains or sub-directories.

Example of subdomain:

Example of sub-directory:

If you choose subdomains, then you will have to configure wildcard subdomains on your server. We will show you how to do that in the next step.

On the other hand, if you choose sub-directories or path based URLs for sites on your network, then you can skip the next step.

Setting Up Wildcard Subdomains

If you decide to use subdomains for websites on your multisite network, then you will need to setup wildcard subdomains for your multisite network.

To do that, first you need to login to your WordPress hosting account’s cPanel dashboard. After that, you need to scroll down to the ‘Domains’ section and then click on ‘Subdomains’.

Setting up wild card subdomains

Note: Depending on your web hosting service, your cPanel dashboard may look slightly different than the screenshot above. This screenshot is from the cPanel on Bluehost.

On the next page, you need to enter the * sign in the subdomain field and select your main domain from the drop-down menu.

Adding wildcard subdomain

Cpanel will automatically detect the document root and will display it in the field below. Now click on the ‘Create’ button to add your wildcard subdomain.

Setting up Custom Domains for Each Site

WordPress multisite also allows you to set different domains for each website in your multisite network.

To set up custom domains, you’ll need to use the domain mapping feature and update nameserver records in your domain registrar account.

Custom domains for WordPress sites on a multisite network

We have created a detailed step by step guide on how to create WordPress multisite with different domains for the setup instructions.

Enabling WordPress Multisite Network Feature

Multisite Network feature comes built-in with each WordPress installation. All you need to do is install and setup WordPress like you normally would. After that, you just need to enable the multisite feature.

You can also enable the multisite feature on any existing WordPress site. Before you enable multisite, don’t forget to create a complete backup of your WordPress site.

To enable Multisite, connect to your site using a FTP client or cPanel file manager, and open the wp-config.php file for editing.

You need to add the following code to your wp-config.php file just before the /* That’s all, stop editing! Happy blogging. */ line.

/* Multisite */
define( 'WP_ALLOW_MULTISITE', true );

Once you are done, you can save and upload your wp-config.php file back to the server.

This code simply enables the multisite feature on your WordPress site. Once enabled, you will still need to setup the multisite network.

Setting Up Your WordPress Multisite Network

Now that you have successfully enabled the Multisite Network feature on your WordPress site, it is time to set up your network.

If you are setting up a mutlisite network on an existing WordPress website, then you will need to deactivate all plugins on your site.

Simply visit the Plugins » Installed Plugins page and select all plugins. You need to select ‘Deactivate’ from the ‘Bulk Actions’ dropdown menu and then click on the ‘Apply’ button.

Deactivate plugins

You can now head over to Tools » Network Setup page to configure your multisite network.

WordPress multisite network setup

On the network setup screen, you will see a notice that you need Apache’s mod_rewrite module installed on your server. This module is installed and enabled on all the best WordPress hosting providers.

The next thing you need to do is to tell WordPress what kind of domain structure you will be using for sites in your network, e.g. Subdomains or Sub-directories.

After that, you would need to provide a title for your network and make sure that the email address in the Network admin email is correct.

Click on the install button to continue.

WordPress will now show you some code that you need to add to your wp-config.php and .htaccess file respectively.

Add code to wp-config and .htaccess files

You can use an FTP client or file manager in the cPanel to copy and paste the code in these two files.

After that you will need to re-login to your WordPress site to access the multisite network.

Configuring Network Settings

Now that you have setup the multisite network, it is time to configure network settings.

You need to switch to the ‘Network Dashboard’ to change network settings, add new sites, and configure other settings.

When you take your mouse over to the ‘My Sites’ menu in the admin toolbar, a flydown popup will appear. Click on the Network Admin » Dashboard.

Network admin dashboard

This will take you to the multisite network dashboard. You will notice that there are new menu items to manage your multisite network. You will also see a “Right Now” dashboard widget that allows you to create a new site and add new users.

Network dashboard

To configure network settings, you need to click on the ‘Settings’ link in the admin sidebar.

The first option on network settings page is to set your site title and admin email address. These fields will be filled automatically with the network title and admin email you entered during setup.

Network settings

Opening Your Multisite Network for Registrations

The ‘Registration Settings’ section on the network settings page is probably the most important setting in your network setup.

By default, both user and site registrations are disabled on the network.

You can choose to open your site for user registration, or allow existing users to create new sites, or allow both user and site registration.

WordPress multisite registration settings

If you are opening your multisite network to registration, then you can check the box next to ‘Registration Notification’ option to receive email notifications every time a new user or site is registered.

If you want to allow individual site administrators to add new users on their sites, then you can check the box next to ‘Add New Users’ option.

Registration options

Limited Email Registration option allows you to limit site or user registration to email addresses from specific domains. This is particularly useful if you only want to allow people from your own organization to register and create users or sites.

Similarly, you can also ban certain domains from registration.

New Site Settings

The ‘New Site Settings’ section allows you to configure default options for new sites created on your multisite network.

You can modify the welcome emails and the contents of first default post, page, and comment in these settings.

New site settings

As a network administrator, you can change these settings anytime.

Upload Settings for Your Multisite Network

It is important for you to keep an eye on the usage of your server resources. Under the ‘Upload Settings’ section, you can limit the total amount of space a site can use for uploads.

The default value is 100 MB which is probably good for at least 100 photo uploads. You can increase or decrease this space depending on how much disk space you have.

Upload settings

The default upload file types are images, audio, video, and pdf files. You can add additional file types if you want like doc, docx, odt, etc.

After that, you can choose a file size limit, so that users can’t upload insanely large files to the server.

Plugin Menu Settings

Next, you can jump to the menu settings. It will allow you to enable the administrative menu for the plugins section on your network sites.

Show or hide plugins menu to site admins

Enabling this will show plugins menu to respective site admins. They can activate or deactivate a plugin on their individual sites, but they cannot install new plugins.

Once you are satisfied with all the configuration settings, make sure to click on the ‘Save Changes’ button.

Adding New Sites to Your WordPress Multisite Network

To add a new site to your WordPress multisite network, simply click on ‘Sites’ under My Sites » Network Admin menu in the admin toolbar.

Adding new sites to your WordPress multisite network

This will show you a list of sites on your current multisite installation. By default, you have your primary site listed as the only site in your WordPress multisite network.

To add a new site, click on the ‘Add New’ button at the top.

Add new site

On the ‘Add New Site’ page, you need to provide the site’s address. You don’t need to type the full address, just the part you want to use as subdomain or sub-directory.

Next, you need to add a site title, and enter the site admin’s email address.

Adding new site details

You can add an admin email address other than the one that you are currently using to manage your multisite network.

If the email address is not currently in use by another user, then WordPress will create a new user and send the username and password to the email address you enter.

Once you are done, click on the ‘Add Site’ button.

A new site will be added to your WordPress multisite network. As the network admin, you will receive a new site registration email as well.

If you created a new user, then that user will receive an email with instructions to set a new password and login.

Adding Themes and Plugins to Your Multisite Network

By default, individual site administrators in a multisite network cannot install themes and plugins on their own.

As the network admin, you can install the respective plugins and themes, so it’s available for all sites on your network.

Installing themes for your multisite network

To add themes, go to My Sites » Network Admin » Themes page.

Installed themes on your WordPress multisite network

On this page, you will see a list of currently installed themes on your WordPress multisite.

You can make a theme available to other sites by clicking on ‘Network Enable’ option under that theme. You can also disable a theme by clicking on ‘Network Disable’ link under the theme. Note: Network Disable option will only appear when the theme is enabled.

To add a new theme, you need to click on the ‘Add New’ button at the top of your screen and then install a WordPress theme as you would normally do.

Once the new theme is installed, you will be able to make it available to other sites on your network with the ‘Network Enable’ option.

If you need recommendations on which themes to make available to your network, take a look at our picks of the best WordPress themes that you can use.

Setting a default theme for your Multisite Network

After you have added a couple of themes, WordPress will still activate the default WordPress theme for each new site.

If you want to make another theme to be the default theme for new sites, then you need to add the following code to your wp-config.php file.

// Setting default theme for new sites
define( 'WP_DEFAULT_THEME', 'your-theme' );

Replace your-theme with the name of your theme. You will need to use the name of the theme’s folder, which you can find out by looking at the /wp-content/themes/ folder.

Installing plugins for your multisite network

Similarly, you can visit My Sites » Network Admin » Plugins page to install plugins and click on the ‘Network Activate’ link below each plugin to activate them on your multisite network.

Network activate plugins on a WordPress multisite

Following are a few essential WordPress plugins that we recommend for every website:

For more plugin recommendations, see our list of the essential WordPress plugins for all websites.

Note: If you have enabled the Plugins Menu option for site admins in the ‘Network Settings’ previously, then the site administrators can activate or deactivate installed plugins on their own. Site admins cannot delete or install a new plugin on their own.

Adding Default Content to Multisite Sites

By default, WordPress allows you to edit some default content for each site on your multisite network. You can go to Settings » Network Settings page and add them under the section ‘New site settings’.

New site defaults

You can edit the content for the default post, page, and comment. We recommend replacing the default content with something more useful for your site admins.

What if you wanted additional default content to be added to each new site?

By default, WordPress does not give you an option to create additional default content for new sites. If you want to do that, then you will need to add custom code to your WordPress multisite.

In this example, we are going to add a new default page to be created for each new site.

add_action('wpmu_new_blog', 'wpb_create_my_pages', 10, 2);
function wpb_create_my_pages($blog_id, $user_id){
// create a new page
  $page_id = wp_insert_post(array(
    'post_title'     => 'About',
    'post_name'      => 'about',
    'post_content'   => 'This is an about page. You can use it to introduce yourself to your readers or you can simply delete it.',
    'post_status'    => 'publish',
    'post_author'    => $user_id, // or "1" (super-admin?)
    'post_type'      => 'page',
    'menu_order'     => 1,
    'comment_status' => 'closed',
    'ping_status'    => 'closed',

You can use the same code with little modifications to create default posts for new sites. Check out the following code:

add_action('wpmu_new_blog', 'wpb_create_my_pages', 10, 2);
function wpb_create_my_pages($blog_id, $user_id){
// create a new page
  $page_id = wp_insert_post(array(
    'post_title'     => 'A sample blog post',
    'post_name'      => 'sample-blog-post',
    'post_content'   => 'This is just another sample blog post. Feel free to delete it.',
    'post_status'    => 'publish',
    'post_author'    => $user_id, // or "1" (super-admin?)
    'post_type'      => 'post',

Troubleshooting WordPress Multisite Issues

Most common issues with WordPress multisite network setup occur due to incorrect configuration of wildcard subdomains and domain mapping issues. Make sure that your web host supports wildcard subdomains before setting up multisite.

Following are some other common issues and their quick fixes.

Fixing login issues on multisite installs

Another common issue is that when using WordPress multisite with sub-directories, some users are unable to login to the admin area of their sites after they add the required code in wp-config.php file.

To fix this, try replacing

define('SUBDOMAIN_INSTALL', false);

line in wp-config.php file with

define('SUBDOMAIN_INSTALL', 'false');

Find unconfirmed users

Another issue that you may come across is not being able to find users who registered on your network but didn’t get the activation email. To fix this issue, see our guide on how to find pending unconfirmed users in WordPress.

Exporting a site from multisite to its own WordPress install

Later at some point, you or another site owner may want to export a site from multisite to its own WordPress install. This can be easily done. For step by step instructions see our guide on how to move a site from WordPress multisite to single install.

You may also want to bookmark our ultimate guide of common WordPress errors and how to fix them. It will save you a lot of time by quickly fixing the most common WordPress issues.

FAQs About WordPress Multisite Network

Many of our users have asked us plenty of questions about WordPress multisite network and how to use it more efficiently. Following are the most frequently asked questions that we have answered.

1. Would I be able to better manage my sites with a multisite network?

To be honest, the answer really depends on your usage scenario.

For example, if your websites are not related to each other, then you would be better off with a multiple site management tool, like InifiteWP.

If you manage multiple sites for a restaurant chain, university, or online magazine, then WordPress multisite will be more efficient.

2. Does WordPress multisite make my websites load faster?

Once again it depends on several factors. Better WordPress hosting with plenty of server resources will allow multisite to be faster but then again with these resources, individual WordPress sites will also run faster.

However, on a shared hosting account, traffic spikes will increase memory usage and slow down all websites on the multisite network at the same time. To improve multisite speed, see our guide on WordPress performance and speed optimization.

3. Can I add an online store to a WordPress Multisite Website?

Yes, you can add an online store in WordPress multisite network. Most likely, you will be using an eCommerce plugin like WooCommerce for that, which is compatible with WordPress multisite.

4. Can I install ‘x plugin’ on my WordPress multisite?

Some WordPress plugins may not be compatible with WordPress multisite. Normally, plugin authors mention it on the plugin’s website and you can avoid installing a plugin that may not work on a multisite setup. However, if it is not mentioned, then it is safe to assume that it is multisite compatible.

5. How do I share user logins and roles across the multisite network?

By default, a user who is registered on one site cannot register or be added to another site on the same network. That’s because they are already registered in the shared WordPress database. However, they don’t have any user role privileges on other sites.

You can use third-party plugins like WP Multisite User Sync to sync users across the network. However, you need to be careful as you may end up giving someone admin privileges to a site.

We hope this article helped you learn how to install and setup WordPress multisite network. You may also want to see our step by step WordPress security guide to protect and keep your WordPress multisite secure, or our expert picks of the best AI chatbot software for your website.

If you liked this article, then please subscribe to our YouTube Channel for WordPress video tutorials. You can also find us on Twitter and Facebook.

Disclosure: Our content is reader-supported. This means if you click on some of our links, then we may earn a commission. See how WPBeginner is funded, why it matters, and how you can support us. Here's our editorial process.

The Ultimate WordPress Toolkit

Get FREE access to our toolkit - a collection of WordPress related products and resources that every professional should have!

Reader Interactions

242 CommentsLeave a Reply

  1. Hi, I am new to WP and learning in baby steps. My husband and I have several websites whose website builder went out of business. So we have a host and domain names. I opened up a wordpress account and am in the process of transferring over one of my sites.
    But, since I read your article above, it looks like a multi-site network might not be best, but I cannot find any info online on how to open up a new and different WP account with a different website. and I would have to do this for each of our five websites. They are all different kinds of sites that do not relate to each other at all.
    what do you suggest? thank you

  2. After following all the instructions on this post, I always get the same problem with the themes. I have a theme for the main website and it works perfect, even the theme selector area is fine.

    However, the 2nd and the other websites created after are completely void of any style, also the theme selector has nothing. I cannot find any proper solution for my problem.

    • Hi Joao Cerca,

      You can go to Network Admin > Themes page to install themes for other sites on your network. You will need to click on the ‘Enable Network’ button below that theme. After that you can go to your other sites and activate theme you want to use on those sites.


  3. When i create multisite on hostgator, i got a warning message to remove www. But i want my websites to look like
    So how can i do like this? Please wpbeginer give me a solution!

  4. I deactivated all plugins at once and suddenly my site stopped working. Browser says “redirected you too many times”. How to solve this?

  5. The problem I am having is that after I create a new subdomain so that I can effectively “add new site” in wordpress, I am unsure how to delete the old “” and point the url to subdomain 2. The second subdomain doesn’t show up in my file structure in my cpanel. So how does one simply “export content from first site, import it into new site…and then change web addresses over?” There seems to be no easy answer online anywhere.

  6. I need to allow users to sign up for a site using multi site but also need my main site duplicated for the user. Can this be done? If so, how?

  7. Great article and super easy steps to follow. When I create the multisite, all I’m getting is Index of / and a directory listing, which at the moment is just cgi-bin. Originally I was getting a site not found error and added FollowSymLinks to my .htaccess file and now just a directory listing.

    Any suggestions how to fix that? Using subdomains as it was an existing site. have updated the wp-config file and .htaccess. Hosting confirms they meet all requirements (mod_rewrite, etc). Just not sure where to go from here. Feels like the site is not finding the WordPress installation.

    Thanks so much for any suggestions!

  8. Hi,
    Your post is VERY interesting and well written. Thanks for that.

    Then, my question: Can a multisite network be installed itself in a subdomain?
    (I would use subdirectories for the individual sites of the network)

    Thanks a lot!

  9. Is there an option to implement woocomerce in this multisite thing, the meaning of this is that if one subdomain site sells an item it will show the order on the subdomain site as wel as one the admin site wich can make other sites etcc.

    Its useful to know if that part would work so there can be one place where all the orders of the subdomains collect

  10. All my dashboards go back to the original site – and any changes are done on the original site…I can’t see where I went wrong.

  11. Hi,

    After modifiying wp-config.php file and .htacces file i am getting this error.

    “One or more database tables are unavailable. The database may need to be repaired.”

    What can be done?


  12. Hi,
    I noticed at least a couple of others running into this same issue, but no answers: When I try to view my newly-created additional sites, I get a 403 error – no permission to view. What did I miss? Dashboards all work fine, I just can’t actually view the sites themselves.

  13. I would like to categorize my self hosted blogs (individual domains) and then let my blog writer only access blogs from a certain category so he can maintain them with fresh content. How do I do that? For categorization I already found this plugin:

    So now only to be able to give users permission to access blogs form a category.

  14. I have created a subdomain but its path is not public_html/ ……
    When i have created a sub domain the steps that I followed were
    1. Gave name to my new subdomain
    2. Then clicked on create button.

    Automatically a path was created

    I have check this in your screenshot and on youtube also but everywhere the path is public_html/
    but why my path is different???
    Please help me in this and also can you help me installing WordPress in my subdomain.

  15. Should one use sub-domains or sub-directories? What are the pros and cons of both? Please add a small guidance on this issue in this article.


  16. hello, thanks so much for your article has really help but how can i access the wp-admin of new domain on my multisite?.. is telling me Access Forbidden with this error massage:
    Access forbidden!

    You don’t have permission to access the requested directory. There is either no index document or the directory is read-protected.

    If you think this is a server error, please contact the webmaster.

    Error 403

    Apache/2.4.23 (Win32) OpenSSL/1.0.2h PHP/7.0.

  17. Is there any way to have a set theme already created like content, design, etc. and when a new user signs up and creates an new site via registering that it automatically has that pre-built website page for them?

  18. Hey, thanks for this description.
    Can you also name me a gallerie plugin which works on a multisite with up to four websites?
    I need something where I create one gallery and use the pictures on every website to not upload them several times.
    Appreciate your help!

  19. hi,

    i want to know that where to upload existing themes. actually i have 10 single sites so i want to implement one multisites. all the single site have same theme but but they have different css. so how to include all 10 themes in multisites for single site.

  20. OK. First. THANK YOU! it’s amazing that you published this full and comprehensive post about creating the wordpress multi-users. I am having a problem finding the one step that shows whether I want a subdomain versus subdirectory. Maybe it’s because I cant find the apache installation so I can’t see find the mod_rewrite. I haven’t gotten past that part of your tutorial (besides enabling the registration) I suppose I can live with the directory.. but I’d REALLY REALLY like the subdomain! :) I setup the wildcard, but I don’t have a “tools” option in the network dashboard and no option to choose between subdomain or directory.

  21. Hi,
    is this possible in wordpress that we can post on 1 website can also be posted on other wordpress website?
    note: not with iframe.

  22. Hi,
    I just set up multiple WordPress websites following your guides but I need to use domain sub directory in multisite network. However, after completing the step-by-step guide, it shows only Subdomains for adding new sites in the Network Admin. How can we have another way to add wildcard subdirectory instead of subdomains? Please provide me the tutorials to follow.

    Thanks so much for helpful articles posted!



  23. I require my users to login to the site to use the services. When I convert my site to multi-site, will my users still be able to go to the base url ( to login – or will they have to go to the subdomain/subdirectory of the site to login in? In other words, if they go to the base url (which requires the username and password) does WordPress recognize each individual user – and then redirect them to the appropriate subdomain/subdirectory that they belong to?

  24. Thank you for sharing this great article.
    I succeed to setup all steps above, but next, how could I access to site1 dashboard?
    ‘’ is not found.

    Could you give me an advise..?

  25. Dear WP Begginer

    I created Multisite. When i create sub domain it allows it but the problem i cant access the subdomain site. When i visit i get an error. I asked my web hosting if i configured wild-card well and they checked they say NO problem on their side.

    When first i install the multisite, It was installed in a sub-directory. I accessed wp-config.php to change define(‘SUBDOMAIN_INSTALL’, ‘false’);” to define(‘SUBDOMAIN_INSTALL’, ‘TRUE’);”.

    Should i chance the .HTACCESS or what can i do?

    • Not sure if you got this resolved but you can’t swap it once you setup the network. It is how it is setup in the first place. I’m not sure why but I’ve found that to be the case for me. You will have to reinstall the network unfortunately. Hope that helps.

  26. I followed the basic instructions for adding the

    /* Multisite */
    define( ‘WP_ALLOW_MULTISITE’ , true);

    to the wp-config.php file in my server through FTP but even after I save the changes and refresh my wordpress site I do not see a NETWORK SETUP option in my TOOLs section.

    I have already deactivated all of my plugins to allow for this and given ample time to let changes take effect.

    Thoughts on why this very basic first step hasn’t worked? The php changes were saved in the files on the server…confirmed

    • Did anyone find a resolution to this? I am having the same problem and am not sure what to try.

      Thank you!

    • Check the quotas on the syntax. Can be that while copying the syntax, the system is putting ` instead of ‘.
      It happened to me once.

      • Thank You!!! I’ve been beating my head against the proverbial wall trying to figure out why I couldn’t get this to work. I went so far as to uninstall and reinstall everything trying to get this to work.

        I never noticed that they weren’t plain quotes.

    • Make sure you paste the code you are supposed to paste in wp-config.php above the line that reads [ /* That’s all, stop editing! Happy blogging. */ ] in wp-config.php

  27. After following this guide on a fresh wordpress installation, the addon sites do not load. I am getting a 404 error when i try to access the addon sites website/dashboard. The main website seems to be working just fine. Any ideas?

  28. I already have a working installation of wordpress (.org). I used for a class project.

    What the class did not teach was…now I have a client who needs a site built – it’s a new site they never had one. So how do I do this and where do I go? I had to use MS webmatrix for the project. I am totally lost and confused. Do you have tutorials on how to do this? I cannot find this anywhere?

    Do you have these tutorials and if not can you make them…

    Thank you…I’m totally frustrated

  29. I want to build a site for a store chain that has multiple stores. If I use multisite and make a site for each store can I get the main theme to copy directly to each store with it’s graphics, so all of them look alike without configuring each store? Can I use WooCommerce and get it to show the inventory of each store, which will be different than other stores?



  30. I migrated two of my sites to siteground under single plan. They have used multi site install those. The main site is working correctly, but i am facing issues with the second site

    It looks like i have an issue with the Multisite installation.

    For instance, when i tried to access the Tools ->Network I get the following message
    Warning: Please deactivate your plugins before enabling the Network feature.

    How do i enable the network, do i loose the data for the second site ?

    I also have separate database for both sites. users accounts are also different

    Is it correct ?

  31. Good day, I am in urgent need of some assistance! I have one site in my WordPress Multisite Network, but I want to change that to a single install of WordPress!

    Please urgently assist!

  32. Excellent article, only spoilt by my ineptitude in following it!
    I must have misunderstood the bit about Registration Settings, as I left the box ‘Registration is disabled’ as ticked. I thought that that meant any NEW registrations would be disabled, and that as I was already registered, that was ok. Sadly, on trying to access the site, I find that my own registration is now disabled!
    How do I restore the situation and access my site?

    • Additional to the above. I read the comment about “replacing

      define(‘SUBDOMAIN_INSTALL’, false);

      line in wp-config.php file with

      define(‘SUBDOMAIN_INSTALL’, ‘false’);”

      Only problem is that I cannot see this line anywhere in my wp-config.php file. There are all sorts of define ‘Authentication Unique Keys and Salts’ (whatever those are), plus Define WPLANG WP DEBUG ABSPATH, as well as the ‘WP_ALLOW_MULTISITE’ inserted as the instructions above, but no SUBDOMAIN_INSTALL

      • Under Settings -> Network Setup – you should find the code to paste into your wp-config.php file.

  33. hello please mine says

    The requested URL /wp-admin/ was not found on this server.

    Additionally, a 404 Not Found error was encountered while trying to use an ErrorDocument to handle the request.

  34. Is last paragraph right? I think, true should be 2nd line of ccodeode.
    “Another common issue is that when using WordPress Multisite with sub-directories, some users are unable to login to the admin area of their sites after they add the required code in wp-config.php file. To fix this, try replacing
    define(‘SUBDOMAIN_INSTALL’, false);
    line in wp-config.php file with
    define(‘SUBDOMAIN_INSTALL’, ‘false’);.
    We hope this article helped you install and setup WordPress multisite network.”

  35. Hi WpBeginner. I am a regular follower of your posts. I was reading your this important article and I found I have done mistake somewhere. But you can better guide me where I am wrong.

    Actually I run a wordpressblog in Indian mother tongue. Later I thought to write in english, so instead of making subdomain, I preferred making subdirectory for the english version of my blog. & I successfully installed WordPress in my subfolder at

    But I am not using multisite option as you mentioned in this blog. I am logging in with two different wp-admin credentials for my main domain and subfolder. Subfolder has of course different htaccess file and robots txt

    Now I want to know from you, am I doing anything in wrong that is damaging my SEO? Traffic coming in my subfolder will not be counted for my main domain? Should I use multisite option?

    Thanks for your patience to read my long comment. I hope to get a knowledgeable reply from your end.

  36. Hi,

    Awesome topic,
    I want to run multiple blogs with separate domains using WordPress. I have multiple domain hosting account at Currently i am running my personal website developed in stranded html and css. How to manage both wordpress multiple bolgs and my personal website together.?

    Thanks in Advance.

  37. Great tutorial. Congrats mate.
    Unforntunately, I’ve got a problem.I’ve installed but the subsite recently created isn’t opening. the error message is “incorret redirect”.
    Do I need to install other wordpress in the subfolders when using with sub-directories ? any idea?


  38. Hi, great article!

    I created the multi site but can’t login to the admin of the new site. I notice you write:

    To fix this, try replacing
    define(‘SUBDOMAIN_INSTALL’, false);
    line in wp-config.php file with
    define(‘SUBDOMAIN_INSTALL’, ‘false’);.

    But my line says:

    define(‘SUBDOMAIN_INSTALL’, true);

    I have changed to false and tried using the comma’s but no luck. Any other ideas?

    I notice no folders have been added to my server to provide for the new site?

    I am just trying to create a one page website for my mate using my DIVI theme and plugins, as well as manage it for him. My hope is to point his new domain name in DNS settings to the web page I create?

    Thanks Doug.

  39. Hi
    I created multisite but I want to open onclick button in main site and open subsite and it’s information when user visit the it will be done..

  40. Great article!

    Would I be able to display a post from one site on the other?
    Have links from one site pointing to another? Are they sharing the same database?

  41. hello I followed all the steps for installation but I am having a template issue with a test fashion store site here the page is not showing up like it should.

  42. Question, wordpress multisite do this.
    *create a clone copy of my main website to a subdomain
    *updates on main website will authomatically reflect on the clone copy in the subdomain

    I want to achieve this because i want a different theme on my clone copy website but i don’t want to manually republish the post on my main website to the clone site

  43. Hi there used this tutorial to create a multisite network worked perfectly. Thanks! But it raised another question. That question would be is it possible to run multiple frameworks on the same multisite network? If so do you have a tutorial that covers this topic?
    We have themes that are designed for both equity framework and genesis framework and would like to demo the themes on the same multisite network.
    Thanks for any info you can offer on this topic

  44. Hi
    I created a multisite, problem when I duplicate or creating a subdomain site it does not show product categories on my landing page. Please help me I new to WP, here is my site url: also here is the subdomain site I created that not showing product categories:

    Thank you

  45. Hi
    I created a multisite, problem when I duplicate or creating a subdomain site it does not show product categories on my landing page. Please help me I new to WP, here is my site url:

Leave a Reply to June Cancel reply

Thanks for choosing to leave a comment. Please keep in mind that all comments are moderated according to our comment policy, and your email address will NOT be published. Please Do NOT use keywords in the name field. Let's have a personal and meaningful conversation.